Roll forming equipment supplier

More Than 30+ Years Manufacturing Experience

Is the bendability of cleanroom panels up to standard?

       Example information: Bulk density of mineral wool 100 kg/m3 Galvanized keel 0.6 mm (T) Baostal panel 0.5 mm (T) Saint-Gobain plasterboard 9.5 mm (T)
       Review Conclusion: Refer to GB/T23932-2009 “Metal Surface Insulated Sandwich Panels for Buildings” and GB/T29468-2012 “Technical Guidelines for the Application of Sandwich Panels in Cleanrooms and Related Environment Controlled Enclosure Systems”.
        Partition wall bending capacity standard: According to “GB/T 29468-2012″, when the deflection of a metal partition panel sandwich panel is L0/250 (L0 is the distance between supports), the deflection of the sandwich panel should not be less. than 0.5 kN/m2.
        Experiments have proven that Mastercard cleanroom wall panels have greater flexural resistance than national standards and can be adapted for cleanroom applications such as the pharmaceutical, electronics and food processing industries. This product has excellent performance, can be customized, field spliced, easy and quick to install, and has a variety of core materials including mineral wool, PU, ​​EPS, paper honeycomb, aluminum honeycomb, etc. The coating and material of the panel can be selected depending on the conditions of use. Cleanroom modular wall panels can directly open holes and reserve PVC pipes to improve installation efficiency, and can be installed flush with cleanroom doors and windows, making them beautiful after installation.
       2. The clean room wall panel system uses aluminum profiles, modular installation, convenient and fast, and can be customized.
       4. A variety of base materials for different environments, fireproof, heat insulating, noise-absorbing and moisture-proof.
       6. Cleanroom wall panels and cleanroom panels greatly improve strength, flatness and aesthetics, and product quality is more stable.
       7. The fitting holes and duct boxes are pre-assembled into a slab in the factory, which effectively reduces secondary pollution during use, especially in the operating room.
       3. Accurately measure and control sheet metal forming, gluing, core filling, composite forming and finished product palletizing.


Post time: Feb-19-2024