Roll forming equipment supplier

More Than 30+ Years Manufacturing Experience

Plant requirements

Plant requirements:

Flat roof plant, pointed plant can be used, but the cornice height should be greater than 5 meters.The effective width of the workshop shall be no less than 8 meters, and the effective length of the workshop shall be greater than 45 meters. The floor of the workshop shall be made of flat cement. The equipment foundation shall be constructed according to the attached drawings and completed before the arrival of the equipment.The equipment adopts 380V, five-wire power supply system, and the total installed capacity of the whole unit is 34KW. The workshop should be equipped with 0.4-0.6Mpa compressed air source. The workshop should be equipped with lighting facilities, which can meet the requirements of illumination.

rock wool sandwich panel 5


Post time: Apr-25-2021